E-Sea Clip-Suction Mounted Flat-line Release Clip
E-Sea Clip-Suction Mounted Flat-line Release Clip On Boat Gunnel
E-Sea Release Clip suction mounted to top of outboard boat motor
E-Sea Clip-Suction Mounted Flat-line Release Clip On top of outboard motor
E-Sea Clip-Suction Mounted Flat-line Release Clip On Boat Transom
E-Sea Clip-Suction Mounted Flat-line Release Clip
E-Sea Clip-Suction Mounted Flat-line Release Clip On Boat Gunnel
E-Sea Release Clip suction mounted to top of outboard boat motor
E-Sea Clip-Suction Mounted Flat-line Release Clip On top of outboard motor
E-Sea Clip-Suction Mounted Flat-line Release Clip On Boat Transom

E-Sea Clip-Suction Mounted Flat-line Release Clip

Price
$33
Taxes and shipping calculated at checkout

Frequently Bought Together

E-Sea Fishing Rod Tether

E-Sea Fishing Rod Tether

$30
E-Sea Paddle Holder-Suction Mounted Paddle and Utility Clip

E-Sea Paddle Holder-Suction Mounted Paddle and Utility Clip

$33

Stock Notification

Get notified when this product is available again

Product Information

The E-Sea Clip is the ultimate solution for organizing your trolling spread and keeping your lines out of the wind and at the waterline. Our heavy duty suction mount allows for easy installation without the need for drilling, and the clip can be attached to outboards, transoms, gunnels, and even the outside of the hull.
Features

-Suction mounted flat-line release clip keeps your trolling spread organized
-Heavy duty suction allows for easy installation without the need for drilling
-Can be attached to outboards, transoms, gunnels, and even outside of the hull
-Large tension screw allows for easy adjustment of clip tension
-Free swinging clip limits line fray
-Safety tether slot for peace of mind (E-Sea Product Safety Tether Sold Separately)

Specifications

-50lbs + of holding power
-3.3"L x 4.25"W x 2.75"H
-Durable UV resistant material built to last in harsh -environments.

Compatibility

The E-Sea Clip is compatible with most smooth surfaces, including but not limited to:

-Power Boats
-Rowboats
-Sailboats
-Kayaks and more!
If mounting surface is rough or porous, use our 3m adhesive E-Sea Mounting Discs(Sold separately).

Product Instructions

To Install:
- Clean and dry the surface where the E-Sea Clip will be mounted before applying the suction mount. Do not moisten the suction cup.
- Place suction cup on smooth surface, pressing firmly on the center screw.
- Position E-Sea Clip onto the suction cup and begin to spin in a clockwise direction.
- After 5 full turns (10 short turns), the suction mount is fully tightened. Do not overtighten.
- If mounting surface is rough or porous, use our 3m adhesive E-Sea Mounting Discs (Sold separately).

To Remove:
- Twist the E-Sea Clip mount counterclockwise until fully unscrewed from the suction cup
- With fingernails, lift outer edge of suction cup and pull away from mounting surface.

*Remove and re-install before next use.

Disclaimer: E-Sea Company and its affiliates assume no liability for incidental or consequential damages resulting from the use of this product.
Care Guide

For best results, remove and reinstall suction mount before each use.
The suction cups can be washed with mild soap and water.

Essential Camping Gear

Suction Bottle Opener
E-Sea Light waterproof paddle board light suction mounted onto a Yolo paddle board shining into the ocean floor at night

Waterproof Paddle Board Lights

Light Up The Night

E-Sea cup adjustable drink holder suction mounted to a brown cooler on top of a fishing raft with fly fisherman in the background

Beverage Holders

Cooler Cup Holders!

Recommended for You

Don't Have A Smooth Surface To Mount To?

Our E-Sea 3M Adhesive Disc allows you to mount our suction products anywhere!

E-Sea Mounting Discs (2Count)-3M Adhesive Disc For Suction Mount On Boat Foam Decking

Foam Decking

E-Sea Mounting Discs (2Count)-3M Adhesive Disc For Suction Mount- Attached to inflatable paddle board with E-Sea Cup mounted holding an XL tumbler

Inflatable Paddleboards

E-Sea Disc mounted to boat non-skid material.

Non-Skid

FAQ

How strong are the suction mounts?

Our suction mounts are rated up to 50+lbs of pull strength. Plenty strong enough for most applications.

Will these work on non smooth surfaces like rough kayak plastic or nonskid boat paint?

Our suction mounts only work very well on smooth clean surfaces. If your desired mounting area is not smooth you can use our thin adhesive discs to stick to any rough surface and then you will be able to suction to that disc.

How long do the suction mounts last before they lose suction?

This time limit varies depending on a few factors. For indoor applications with moderate temperature and ideal smooth surfaces (glass, gelcoat, sheet metal, plastic), suction should last several weeks without any loss of suction.

Over longer periods of time the pvc suction cup may stretch out so we recommend re applying after every use or as often as you can to maintain 100% suction power.

For outdoor use in hotter temperatures suction power time limit may be less which is why we recommend re applying after every use or as often as you can. That being said, we have had several products in direct sunlight in the south Florida heat for a couple years and only re apply them every 30 days or so.

What size cup fits in your E-Sea Cup Holders?

You can fit slim cans all the way up to XL 32oz yeti tumblers. Unlike most 2 tier cupholders, ours actually holds your drinks upright so no angled tumblers.

Can I use these suction accessories on my inflatable paddle board?

Short answer, Yes! Our suction mounts will only work on smooth clean surfaces but adding an E-Sea Adhesive Disc to your board will allow you to mount all of our suction mounted products anywhere on your inflatable board.

Where are E-Sea Company products made?

We proudly make, assemble and package all of our products in the USA.

Will E-Sea Co. products deteriorate in the sun?

All of our plastic parts we manufacture are made with UV inhibitors which protect them from the suns harmful rays. No yellowing, no melting in the sun, no dry rot problems. As for the rest of our accessories; we only source the best quality with UV and Stainless Steel construction taking top priority.

Are these products saltwater safe?

Absolutely! We only use top quality stainless steel screws and material on our products. One of our best features is our suction mount construction not requiring any cheap metal parts; just heavy duty resin which will never rust.