Flushmaster Cradle

Our suction mounts are rated up to 50+lbs of pull strength. Plenty strong enough for most applications.

Our suction mounts only work very well on smooth clean surfaces. If your desired mounting area is not smooth you can use our thin adhesive discs to stick to any rough surface and then you will be able to suction to that disc.

This time limit varies depending on a few factors. For indoor applications with moderate temperature and ideal smooth surfaces (glass, gelcoat, sheet metal, plastic), suction should last several weeks without any loss of suction.

Over longer periods of time the pvc suction cup may stretch out so we recommend re applying after every use or as often as you can to maintain 100% suction power.

For outdoor use in hotter temperatures suction power time limit may be less which is why we recommend re applying after every use or as often as you can. That being said, we have had several products in direct sunlight in the south Florida heat for a couple years and only re apply them every 30 days or so.

You can fit slim cans all the way up to XL 32oz yeti tumblers. Unlike most 2 tier cupholders, ours actually holds your drinks upright so no angled tumblers.

Short answer, Yes! Our suction mounts will only work on smooth clean surfaces but adding an E-Sea Adhesive Disc to your board will allow you to mount all of our suction mounted products anywhere on your inflatable board.

We proudly make, assemble and package all of our products in the USA.

All of our plastic parts we manufacture are made with UV inhibitors which protect them from the suns harmful rays. No yellowing, no melting in the sun, no dry rot problems. As for the rest of our accessories; we only source the best quality with UV and Stainless Steel construction taking top priority.

Absolutely! We only use top quality stainless steel screws and material on our products. One of our best features is our suction mount construction not requiring any cheap metal parts; just heavy duty resin which will never rust.