E-Sea Paddle Holder-Suction Mounted Paddle and Utility Clip
E-Sea Paddle Holder-Suction Mounted Paddle and Utility Clip- On paddle board holding paddle
E-Sea Paddle & Utility Clip used as a fishing plyers and leader spool holder on boat console
E-Sea Paddle Holder-Suction Mounted Paddle and Utility Clip- Mounted on E-Sea Disc holding a paddle on an inflatable paddle board
E-Sea Paddle Holder-Suction Mounted Paddle and Utility Clip- On boat gunnel holding boat scrub brush
E-Sea Paddle & Utility Clip used as a filet knife holder on boat transom
E-Sea Paddle Holder-Suction Mounted Paddle and Utility Clip- Mounted on E-Sea Disc holding a paddle on paddle board
E-Sea Paddle & Utility Clip used as a fly-rod holder on boat gunnel
E-Sea Paddle & Utility Clip used as a bait net holder on boat transom
E-Sea Paddle & Utility Clip used as a fishing gaff holder on boat gunnel
E-Sea Paddle & Utility Clip used as a fishing gaff holder on boat gunnel
E-Sea Paddle & Utility Clip used as a fishing rod holder on boat gunnel
E-Sea Paddle & Utility Clip used as a fishing rod holder on boat gunnel
E-Sea Paddle & Utility Clip used as a filet knife holder on boat console
E-Sea Paddle & Utility Clip used as a bait net holder on boat console
E-Sea Paddle & Utility Clip used as a plier holder on boat console
E-Sea Padle & Utility Clip holding a lobster net suction mounted to a boat gunnel
E-Sea Paddle Holder-Suction Mounted Paddle and Utility Clip
E-Sea Paddle Holder-Suction Mounted Paddle and Utility Clip- On paddle board holding paddle
E-Sea Paddle & Utility Clip used as a fishing plyers and leader spool holder on boat console
E-Sea Paddle Holder-Suction Mounted Paddle and Utility Clip- Mounted on E-Sea Disc holding a paddle on an inflatable paddle board
E-Sea Paddle Holder-Suction Mounted Paddle and Utility Clip- On boat gunnel holding boat scrub brush
E-Sea Paddle & Utility Clip used as a filet knife holder on boat transom
E-Sea Paddle Holder-Suction Mounted Paddle and Utility Clip- Mounted on E-Sea Disc holding a paddle on paddle board
E-Sea Paddle & Utility Clip used as a fly-rod holder on boat gunnel
E-Sea Paddle & Utility Clip used as a bait net holder on boat transom
E-Sea Paddle & Utility Clip used as a fishing gaff holder on boat gunnel
E-Sea Paddle & Utility Clip used as a fishing gaff holder on boat gunnel
E-Sea Paddle & Utility Clip used as a fishing rod holder on boat gunnel
E-Sea Paddle & Utility Clip used as a fishing rod holder on boat gunnel
E-Sea Paddle & Utility Clip used as a filet knife holder on boat console
E-Sea Paddle & Utility Clip used as a bait net holder on boat console
E-Sea Paddle & Utility Clip used as a plier holder on boat console
E-Sea Padle & Utility Clip holding a lobster net suction mounted to a boat gunnel

E-Sea Paddle Holder-Suction Mounted Paddle and Utility Clip

Price
$33
Taxes and shipping calculated at checkout

Frequently Bought Together

A black E-Sea suction mounted utility cleat designed for securing paddle boards, fenders & kayaks

E-Sea Cleat-Suction Mounted Utility Cleat

$33

Product Information

E-Sea Paddle Holder is a great solution to help keep your paddle or fishing gear securely in place. This heavy-duty suction-mounted paddle holder is designed to make storing your paddle easy and convenient. It's versatile design also makes it a great suction plier holder, fishing rod holder and fishing leader holder!  Whether you're fishing, anchored or out at the sandbar, you can count on the E-Sea Paddle and Utility Clip to secure your gear!
Features

-POWERFUL: Our E-Sea Suction Mount provides an ultra strong hold. 50+lbs of suction power
-EASY TO USE: Easy spin-on & spin-off installation means no drilling holes
-CLEAN: Clear PVC suction cups won't leave any marks or residue
-HEAVY-DUTY: Durable UV resistant material built to last in harsh environments
-VERSITILE: Great for push pole, fishing rod, anchor pins, bait nets, boat brush, pliers, leader & fishing gaff storage*(where diameter permits). Great fit for most paddle board and kayak paddles.
-SAFETY SLOT: Bracket includes two tether slots for peace of mind
-INCLUDES: Free bungee to keep gear secure!

Specifications

-Suction mount provides 50+lbs of holding power
-Can secure diameters of .90" to 1.25"
-6.0"L x 4.10"W x 2.5"Depth

Compatibility

The E-Sea Paddle holder is compatible with most smooth surfaces, including but not limited to:

Boats- Boat brushes, gaffs, bait nets, plyers.
Paddle Boards
iSUPS (Use E-Sea Mounting Discs)
Kayaks
ATVs
RVs
Home use and more
If mounting surface is rough or porous, use our 3m adhesive E-Sea Mounting Discs (Sold separately).
To secure smaller diameter items, use our Ball Bungee (Sold separately). Coming Soon.

Product Instructions

To Install:
- Clean and dry the surface where the E-Sea Paddle Holder will be mounted before applying the suction mount. - Do not moisten the suction cup.
- Place the suction cup on the smooth surface, pressing firmly on the center screw.
- Position the E-Sea Paddle Holder onto the suction cup and begin to spin the holder in a clockwise position.
- After 5 full turns (10 short turns), the suction mount is fully tightened. Do not overtighten.
- If mounting surface is rough or porous, use our 3m adhesive E-Sea Mounting Discs (Sold separately).

To Remove:
- Twist the E-Sea Paddle Holder mount counterclockwise until fully unscrewed from the suction cup.
- With your fingernails, lift the outer edge of the suction cup and pull away from the mounting surface.

*Remove and re-install before next use.

Disclaimer: E-Sea Company and its affiliates assume no liability for incidental or consequential damages resulting from the use of this product.
Care Guide

For best results, remove and reinstall suction mount before each use.
The suction cups can be washed with mild soap and water.

Essential Camping Gear

Suction Bottle Opener
E-Sea Light waterproof paddle board light suction mounted onto a Yolo paddle board shining into the ocean floor at night

Waterproof Paddle Board Lights

Light Up The Night

E-Sea cup adjustable drink holder suction mounted to a brown cooler on top of a fishing raft with fly fisherman in the background

Beverage Holders

Cooler Cup Holders!

Recommended for You

Don't Have A Smooth Surface To Mount To?

Our E-Sea 3M Adhesive Disc allows you to mount our suction products anywhere!

E-Sea Mounting Discs (2Count)-3M Adhesive Disc For Suction Mount On Boat Foam Decking

Foam Decking

E-Sea Mounting Discs (2Count)-3M Adhesive Disc For Suction Mount- Attached to inflatable paddle board with E-Sea Cup mounted holding an XL tumbler

Inflatable Paddleboards

E-Sea Disc mounted to boat non-skid material.

Non-Skid

FAQ

How strong are the suction mounts?

Our suction mounts are rated up to 50+lbs of pull strength. Plenty strong enough for most applications.

Will these work on non smooth surfaces like rough kayak plastic or nonskid boat paint?

Our suction mounts only work very well on smooth clean surfaces. If your desired mounting area is not smooth you can use our thin adhesive discs to stick to any rough surface and then you will be able to suction to that disc.

How long do the suction mounts last before they lose suction?

This time limit varies depending on a few factors. For indoor applications with moderate temperature and ideal smooth surfaces (glass, gelcoat, sheet metal, plastic), suction should last several weeks without any loss of suction.

Over longer periods of time the pvc suction cup may stretch out so we recommend re applying after every use or as often as you can to maintain 100% suction power.

For outdoor use in hotter temperatures suction power time limit may be less which is why we recommend re applying after every use or as often as you can. That being said, we have had several products in direct sunlight in the south Florida heat for a couple years and only re apply them every 30 days or so.

What size cup fits in your E-Sea Cup Holders?

You can fit slim cans all the way up to XL 32oz yeti tumblers. Unlike most 2 tier cupholders, ours actually holds your drinks upright so no angled tumblers.

Can I use these suction accessories on my inflatable paddle board?

Short answer, Yes! Our suction mounts will only work on smooth clean surfaces but adding an E-Sea Adhesive Disc to your board will allow you to mount all of our suction mounted products anywhere on your inflatable board.

Where are E-Sea Company products made?

We proudly make, assemble and package all of our products in the USA.

Will E-Sea Co. products deteriorate in the sun?

All of our plastic parts we manufacture are made with UV inhibitors which protect them from the suns harmful rays. No yellowing, no melting in the sun, no dry rot problems. As for the rest of our accessories; we only source the best quality with UV and Stainless Steel construction taking top priority.

Are these products saltwater safe?

Absolutely! We only use top quality stainless steel screws and material on our products. One of our best features is our suction mount construction not requiring any cheap metal parts; just heavy duty resin which will never rust.