E-Sea Light- Suction Mounted Waterproof Floodlight
E-Sea Light- Suction Mounted Waterproof Floodlight- Mounted on E-Sea Disc on top of hard paddle board with E-Sea Tether for extra security
E-Sea Light- Suction Mounted Waterproof Floodlight- Underneath paddle board at night
E-Sea Light- Suction Mounted Waterproof Floodlight- Adjustable angle mount & 5 color modes
E-Sea Light suction mounted to the top of a boat outboard at dusk lighting up the aft of a boat
Person preparing food under a tent at night near a land rover defender with an E-Sea Light shining bright on the campsite
E-Sea Light- Suction Mounted Waterproof Floodlight- Mounted on top of outboard boat motor
Three E-Sea Lights suction mounted to an RV lighting up the campsite
E-Sea Light- Suction Mounted Waterproof Floodlight- Underneath kayak at night
E-Sea Light- Suction Mounted Waterproof Floodlight- Underneath kayak at night demonstrating different color modes
E-Sea Light suction mounted to a tan Yeti Cooler at a campsite
E-Sea Light- Suction Mounted Waterproof Floodlight- Mounted on top of outboard boat motor demonstrating blue light mode at night
E-Sea Light- Suction Mounted Waterproof Floodlight
E-Sea Light- Suction Mounted Waterproof Floodlight
E-Sea Light- Suction Mounted Waterproof Floodlight- Mounted on E-Sea Disc on top of hard paddle board with E-Sea Tether for extra security
E-Sea Light- Suction Mounted Waterproof Floodlight- Underneath paddle board at night
E-Sea Light- Suction Mounted Waterproof Floodlight- Adjustable angle mount & 5 color modes
E-Sea Light suction mounted to the top of a boat outboard at dusk lighting up the aft of a boat
Person preparing food under a tent at night near a land rover defender with an E-Sea Light shining bright on the campsite
E-Sea Light- Suction Mounted Waterproof Floodlight- Mounted on top of outboard boat motor
Three E-Sea Lights suction mounted to an RV lighting up the campsite
E-Sea Light- Suction Mounted Waterproof Floodlight- Underneath kayak at night
E-Sea Light- Suction Mounted Waterproof Floodlight- Underneath kayak at night demonstrating different color modes
E-Sea Light suction mounted to a tan Yeti Cooler at a campsite
E-Sea Light- Suction Mounted Waterproof Floodlight- Mounted on top of outboard boat motor demonstrating blue light mode at night
E-Sea Light- Suction Mounted Waterproof Floodlight

E-Sea Light- Suction Mounted Waterproof Floodlight

Price
$61
Taxes and shipping calculated at checkout

Frequently Bought Together

Two circular mounting discs, one black and one white, intended for use with E-Sea suction products.

E-Sea Mounting Discs (2Count)

$9
A black E-Sea suction mounted utility cleat designed for securing paddle boards, fenders & kayaks

E-Sea Cleat-Suction Mounted Utility Cleat

$33
E-Sea Paddle Holder-Suction Mounted Paddle and Utility Clip

E-Sea Paddle Holder-Suction Mounted Paddle and Utility Clip

$33

Stock Notification

Get notified when this product is available again

Product Information

The E-Sea Light-Suction mounted waterproof floodlight is the perfect accessory for all your outdoor activities. This powerful Suptig 72 LED array light is fully waterproof up to 164 feet and can last up to 3-4 hours per charge. With its rechargeable battery and included micro USB charging cord, you can easily keep the light going everywhere you go. The heavy-duty suction mount allows you to install the light without any drilling, and the adjustable angle mount lets you get the light just right. Five color modes - white, red, orange, blue, and pink - give you the perfect illumination for any situation. Whether you're on a boat, paddle board, or just need some extra light while camping, E-Sea Light has got you covered.
Features

-Suptig 72 LED array light
-Built-in rechargeable battery
-3-4 hours of battery life per charge
-Waterproof up to 164 feet
-E-Sea light floats!
-Micro USB charging cord included
-Powerful LED wide angle beam
-Heavy-duty suction mount
-5 color modes: -White-Red-Orange-Blue-Pink
-Adjustable angle suction mount
-No drilling required

Specifications

-Durable UV resistant material built to last in harsh environments.
-2600MA/H battery capacity
-Utilizes 5V/1000MA 31"micro usb charging cord
-500-3800LUX Light intensity (600 Lumens)
-3-4hr battery life per charge
-Vertical Mounting Dimensions: 3.25"Depth x 4.5"W x 6.0"H
-Horizontal Mounting Dimensions: 3.3"Depth x 4.5"W x 5.87"H

Compatibility

The E-Sea Light is compatible with most smooth surfaces, including but not limited to:

-Boats
-Paddle Boards- Use E-Sea Light on top or underneath your board!
-iSUPS (Use E-Sea Mounting Discs)
-Kayaks
-ATVs
-RVs
-Underwater scuba diving
-At Home use
-While Camping
-Emergency Roadside Light
If mounting surface is rough or porous, use our 3m adhesive E-Sea Mounting Discs (Sold separately).

Product Instructions

To Install:
- Clean and dry the surface where the E-Sea Light will be mounted before applying the suction mount. Do not moisten the suction cup.
- Place the suction cup on the smooth surface, pressing firmly on the center screw.
- Position the adjustable angle mount onto the suction cup and begin to spin the mount in a clockwise direction.
- After 5 full turns (10 short turns), the suction mount is fully tightened. Do not overtighten.
- Next, attach the action camera adapter onto the adjustable angle mount using the thumbscrew provided.
- Last, align the E-Sea Light onto the action camera adapter and secure using the thumbscrew provided.
If mounting surface is rough or porous, use our 3m adhesive E-Sea Mounting Discs (Sold separately).

To Remove:
- Unscrew thumbscrew from adjustable angle mount and remove E-Sea Light.
- Twist the adjustable angle mount counterclockwise until fully unscrewed from the suction cup.
- With your fingernails, lift the outer edge of the suction cup and pull it away from the mounting surface.

*Remove and re-install before next use.

Disclaimer: E-Sea Company and its affiliates assume no liability for incidental or consequential damages resulting from the use of this product.
Care Guide

For best results, remove and reinstall suction mount before each use.
The suction cups can be washed with mild soap and water.

Essential Camping Gear

Suction Bottle Opener
E-Sea Light waterproof paddle board light suction mounted onto a Yolo paddle board shining into the ocean floor at night

Waterproof Paddle Board Lights

Light Up The Night

E-Sea cup adjustable drink holder suction mounted to a brown cooler on top of a fishing raft with fly fisherman in the background

Beverage Holders

Cooler Cup Holders!

Recommended for You

Don't Have A Smooth Surface To Mount To?

Our E-Sea 3M Adhesive Disc allows you to mount our suction products anywhere!

E-Sea Mounting Discs (2Count)-3M Adhesive Disc For Suction Mount On Boat Foam Decking

Foam Decking

E-Sea Mounting Discs (2Count)-3M Adhesive Disc For Suction Mount- Attached to inflatable paddle board with E-Sea Cup mounted holding an XL tumbler

Inflatable Paddleboards

E-Sea Disc mounted to boat non-skid material.

Non-Skid

FAQ

How strong are the suction mounts?

Our suction mounts are rated up to 50+lbs of pull strength. Plenty strong enough for most applications.

Will these work on non smooth surfaces like rough kayak plastic or nonskid boat paint?

Our suction mounts only work very well on smooth clean surfaces. If your desired mounting area is not smooth you can use our thin adhesive discs to stick to any rough surface and then you will be able to suction to that disc.

How long do the suction mounts last before they lose suction?

This time limit varies depending on a few factors. For indoor applications with moderate temperature and ideal smooth surfaces (glass, gelcoat, sheet metal, plastic), suction should last several weeks without any loss of suction.

Over longer periods of time the pvc suction cup may stretch out so we recommend re applying after every use or as often as you can to maintain 100% suction power.

For outdoor use in hotter temperatures suction power time limit may be less which is why we recommend re applying after every use or as often as you can. That being said, we have had several products in direct sunlight in the south Florida heat for a couple years and only re apply them every 30 days or so.

What size cup fits in your E-Sea Cup Holders?

You can fit slim cans all the way up to XL 32oz yeti tumblers. Unlike most 2 tier cupholders, ours actually holds your drinks upright so no angled tumblers.

Can I use these suction accessories on my inflatable paddle board?

Short answer, Yes! Our suction mounts will only work on smooth clean surfaces but adding an E-Sea Adhesive Disc to your board will allow you to mount all of our suction mounted products anywhere on your inflatable board.

Where are E-Sea Company products made?

We proudly make, assemble and package all of our products in the USA.

Will E-Sea Co. products deteriorate in the sun?

All of our plastic parts we manufacture are made with UV inhibitors which protect them from the suns harmful rays. No yellowing, no melting in the sun, no dry rot problems. As for the rest of our accessories; we only source the best quality with UV and Stainless Steel construction taking top priority.

Are these products saltwater safe?

Absolutely! We only use top quality stainless steel screws and material on our products. One of our best features is our suction mount construction not requiring any cheap metal parts; just heavy duty resin which will never rust.